• Volpato SPO 600
• Adjustable feed speed
• Adjustable spindle speed
• Two processing units:
• Drum with nylon bristles “tynex”
• Drum with metal bristles
• The thickness of the part is 18-320 mm
• Maximum detail width 580 mm
• The minimum length of the part is 320 mm

• CNC machining center Bacci Smartjet TGV
• The maximum size of the detail is 600 x 600 x 300 mm
• The exact size depends on the specific treatment. We use the Solidworks program to make the model. We add processing operations using AlphaCam.

• Vertical drill block
• Horizontal drill block
• Working area 2500 x 1250 mm
• Saw blade
• Aggregate readiness
• It is also possible to use a vacuum sole
• Working area 2500 x 1250 mm
• Z-axis mobility 260 mm

• Work area 348 x 543 x 194 mm

• Artec Spider 3D scanner for small objects (approx. 50-200 mm). Scans geometry and texture. Resolution 0.1 mm. The output file is a 3D mesh model (obj, stl, etc.).

• Zortrax M300 dual
• Work area 300 x 300 x 300 mm

• Laser power 100W. The working area of ​​the cutter is 600 × 900 mm for a part with a height of 400 mm.
• Longer parts can also be placed in the machine, but only the area remaining in the work area can be processed, and the material must not be thicker than 20 mm. It is possible to cut up to 10 mm thick plywood, wood, plexiglass, etc. (except metal).

Hand spray equipment:

• Low pressure spray gun with top container – DeWilbiss Advance HD
• Low pressure sprayer with low pressure pump and preheater – GRACO Triton 308 SS, DeWilbiss
• Hydraulic air-directed spray – GRACO Merkur Bellows, GRACO AA
• Hydraulic air-directed spray – GRACO Merkur, GRACO AA

Spray chamber:

• CAPRI VK-3000
• Chamber width 3000 mm, height 2200 mm

• Cefla Mito-K
• Finishing line with automatic part detection
• Can be finished with both high pressure and low pressure guns
• Only water-based finishing materials can be finished

• Surface printing machine PIXART PLOT16
• Working width 1550 x 3000 mm
• The thickness of the processed part is 3 – 95 mm
• UV curing acrylic inks are used for printing
• Materials for printing: wood, paper, plastic, glass, board materials (MDF, HDF, plywood, etc.)

• Format saw, Altendorf F25 – Type4
• Slide travel 3200 mm
• Duplex unit
• With cutting disc
• Saw tilt 0-46 degrees
• Cutting height at a 90-degree angle 100 mm
• Cutting height at a 45-degree angle 70 mm

• Serva belt sander LVO 150T
• Overall dimensions of the work table: length 950 mm, width 450 mm
• Oscillating work unit: enables through grinding and drum grinding
• Sanding belt width 150 mm

• Viet OPERA 5-3.3 CKF
• Working width 1350 mm
• The minimum thickness of the processed part is 3 mm
• The maximum thickness of the processed part is 200 mm
• The minimum length of the processed part is 300 mm
• The grinding machine has 3 grinding units:
• Cross fiber sanding unit, for pre-sanding veneer material
• Combined drum/solenoid sanding unit that allows for veneer sanding and intermediate sanding
• Sole grinding unit for intermediate grinding, using an internal grooved cooling belt (Chevron tape, “superfinish”) reduces the proportion of intermediate grinding up to 50%

• Casadei F205
• Workbench dimensions 1200 x 605 mm
• Tenon milling sled
• Advance
• Spindle diameter 40 mm
• Spindle inclination 90-45 degrees
• Spindle stroke 125 mm
• Engine power 5 kW

• CASADEI PFS 520
• The working area of ​​the planer is 2300 x 520 mm
• Thickness table working area 900 x 530 mm
• The thickness of the detail on the planer is 3.5-250 mm
• The minimum length of the part on the thickness planer is 180 mm
• The maximum planable layer thickness is 8 mm
• Spiral planer spindle Z84 15 x 15 x 2.5 mm with 2 spirals with 20% grain overlap
• Rubberized output shaft
• Thickness table with four columns and motorized lifting
• Feed speeds: 5-8-12-18 m/min
• Engine power 7 kW
• The rotation speed of the planer shaft is 5000 rpm

• Casadei Aura 400
• Work table dimensions: 500 x 450 mm
• Desk tilt 0-20 degrees
• Maximum cutting height 280 mm
• Lower tape guides for cutting the curved part
• Tapes of different widths

• FlexTrim Sand-perfect 400
• With two work units:
  • Flextrim brush sanding on one unit, for intermediate sanding of profiled or curved parts
  • The second unit has a grinding drum for grinding curved parts
• The length of each spindle is 400 mm
• Spindle speed 50-450 rpm

• Multi-spindle drill VITAP ALFA 21 CLASSIC
• Number of spindles: 21
• Pitch between spindles: 32 mm
• Distance between outer spindles: 640 mm
• Maximum drilling depth: 70 mm
• Dimensions of the desktop: 864 x 500 mm
• Spindle speed: 2800 rpm
• Engine power: 1.5 kW (2 HP)
• General dimensions of the device: 1070 x 890 x 1240 mm

• Pillar drill Optidrill D 26PRO
• Tiltability of the work surface: +/- 45 degrees
• Distance between spindle and column: 210 mm
• Spindle stroke: 85 mm
• Workbench dimensions: 330 x 290 mm (L x W)
• Drill rotation range: 200 – 2440 rpm
• Motor power: 750 W / 400 V
• Dimensions 670 x 355 x 1640 mm
• Distance from the spindle to the table / base 720 mm / 1230 mm

• Manual edge banding machine Conturo KA 65-Set
• Power: 1200 W
• Edge height: 18-65 mm
• Edge thickness: 0.5-3.0 mm
• Inner radius: >50 mm
• Heating time: 8.00 min
• Melting point: 100-210°C
• Feed speed: 2/4m/min

• A router that combines the precision of CNC with the ease of use of a hand tool. The device does not require prior CNC bench programming experience. The machine’s movement trajectories are corrected by the computer.
• Speed ​​control in the range of 10,000-26,000 rpm
• Maximum Z-axis travel 43 mm
• Touch screen
• Weight 6.6 kg

• Working range – 1300 mm
• Lifting power with tool 12.5 kg
• The weight of the device is 33.5 kg
• Freedom of movement 6
• In pressure sensitive up to 100 N
• Energy consumption 615 W
• IP classification IP54
• It is possible to install at the customer’s place
• Installation option floor, wall, ceiling
• Developed working solutions:
• Grinding with an orbital sander Mirka
• Lifting parts with a vacuum

• Dimensions 580 x 800 x 300 mm
• Load capacity 250 kg